Meister BC-10L DRO
Meister BC-10L DRO
Well I took the plunge and add a DRO system to my Grizzly G4003G metal
lathe and could not be happier!
After many hours of searching the internet and all the machining groups I decided to go with the Meister DRO
system made in Singapore (You can read more about this in the Comments section)
I was not able to find much information on adding a DRO system to the Grizzly 12 x 36 metal lathe so I've
included details and pictures on how I installed mine below.
Thanks,
Steve Bedair
After many hours of searching the internet and all the machining groups I decided to go with the Meister DRO
system made in Singapore (You can read more about this in the Comments section)
I was not able to find much information on adding a DRO system to the Grizzly 12 x 36 metal lathe so I've
included details and pictures on how I installed mine below.
Thanks,
Steve Bedair
Meister BC-10L two Axis DRO
Functions:
- Metric / Inch
- "1/2" Selected axis display is divided by 2.
- Preset dimension.
- Absolute / Increment Co-ordinate Interchange.
- Recall - Recall the memorized coordinate position.
- Mechanic Zero Position Memory: re-establish workpiece zero position after power failure.
- Radius / Diameter (R / D) key pad on front panel.
- Taper measure: Measure the angle of a cone.
- Scientific Calculator.
- Linear error correction.
- Power down memory.
- Change scale direction.
- 99 tool setting memory.
DRO Display Specification:
- Response Speed: 60m/min (198.6 feet/min).
- Resolution: 0.005mm/0.0002",
(can be set to match 1 um & 10 um linear scale). - Quantizing error: +/- 1 count.
- Power Source: AC 110 - 220V, 50 - 60 Hz.
- Auto-switching power supply.
- Temperature range: Operating 0 ~ 40 deg C.
- Display: 8-digits green color LED display.
- Dimension: 11.5" x 7.5" x 4.0"
(290 x 190 x 100 mm). - Die-cast alumimiun casing.
Linear Scale: